Ford 8N Tractor Parts Catalog

Main Entrance | View Shopping Cart | Place Order | Help
Cooling System | Decals | Electrical-Ignition | Electrical-Starting & Charging | Engine Overhaul Kits | Engine Parts | Fuel System | Hitch & Hydraulics | Manuals | Rod & Main Bearings | SPECIALTY ITEMS | Sheet Metal | Sleeves, Pistons, & Rings | Steering & Front Axle | Transmission, Rear Axle, and PTO | Vintage Tractor Parts

Hitch & Hydraulics

Part 9N615 - HYD. PUMP PISTON
9N615---Piston for hydraulic pump, 0.80" dia. Rectangular body, overall 4-1/2" x 4". For 9N, 2N, 8N tractors (1939 thru 1952).
Price: $31.68
Enter quantity
to cart

Part 8N638 - HYD. PUMP SAFETY/RELIEF VALVE
8N638----Hydraulic pump safety / relief valve assembly. 9N, 2N, 8N.
Price: $29.93
Enter quantity
to cart

Part 194354 - HYD. PUMP SHAFT, 3/4" x 13"
194354---Hyd. pump drive shaft, 3/4" dia, 13" overall length. Has splines on one end only. For use with L601-14 Morflex coupler assy., and 192161 or 54C2055 hub. Pump end is 3/4"dia. with 3/16" keyway. Hub end is 6 splines, 3/4"dia. (Keyway uses 3/16" x 3/4" half-round key. Not included. Purchase locally.)
Price: $26.45
Enter quantity
to cart

Part 8N577A/16768 - LEVELING BOX ASSEMBLY, RIGHT HAND
8N577A / 16768---Leveling box assembly, for right hand side. All Ford tractors, (1939 to 1964), EXCEPT 501 & Majors. Adjusts from 19-1/2 to 22 inches. Includes NCA577A gearbox with 9N585A fork and 957E566 knuckle.
Price: $62.75
Enter quantity
to cart

Part 9N585A - LEVELING BOX FORK, RH
9N585A---Hydraulic lift leveling rod fork, right hand. 9N, 2N, 8N. Used with NCA577A leveling assy. Length 10-1/4".
Price: $25.01
Enter quantity
to cart

Part NCA579B - LEVELING BOX SHAFT & GEAR
NCA579B---Leveling box shaft with pinion gear. For NCA577A hyd. lift leveling box assy. Length 14"; thread length 5". Connects leveling gear box to 9N585A leveling rod fork.
Price: $11.12
Enter quantity
to cart

Part LAS192 - LIFT ARM WELD END, Cat. 1
LAS192---Lift arm repair end, bent, forged. Category 1, 7/8" pin hole. 1-3/4" width at weld end. 5-1/4" overall length. (Cut off old ball end and weld LAS192 in its place.)
Price: $12.24
Enter quantity
to cart

Part LCRK928 - LIFT COVER REPAIR GASKET KIT
LCRK928 / LCRK2030---Hydraulic lift cover repair gasket kit. For tractors: 9N, 2N, 8N. Contains gaskets: 9N502 lift cover to center housing, 9N611 pump base to center housing, 2x-9N613 valve chamber to pump base, 9N553 lift cylinder to lift cover, 9N532 quadrant to lift cover, 2x-9N4131 side cover, NAA473A back-up washer, and NAA533A o-ring. (NAA473A & NAA533A are only used with NAA530B piston, if so equipped.)
Price: $8.86
Enter quantity
to cart

Part NCA563C - LOWER LINK SUPPORT SHAFT, 8N
NCA563C---Lower link support pin / lower lift arm shaft. 5" long. Threaded on both ends. Middle section: inner end tapered and outer end straight. Tractor: 8N.
Price: $18.05
Enter quantity
to cart

Part NAA533A - O-RING, HYD LIFT PISTON
NAA533A--- O-ring for hydraulic lift piston NAA530B.
Price: $0.74
Enter quantity
to cart

Part 9N649A - PTO SHAFT BUSHING, for HYD. PUMP
9N649A---Bushing, for PTO shaft, for hydraulic pump base. Tractors: 9N, 2N, 8N, (1939 to 1952). Replaces: 9N649B, 9N649C.
Price: $24.78
Enter quantity
to cart

Part L601-14 - PUMP DRIVE COUPLERS
L601-14 ---Morflex Series 302 coupler complete with 2 drive flanges, set screws, 4 bolts & lock nuts.
Price: $50.85
Enter quantity
to cart

Go to page: 1 2  3  4
Previous Page - Next Page

Return to top of page for other categories & links
Davis Tractor Parts
24263 Antioch Road
Andalusia, AL 36421
Phone: 334-222-7214
Fax: 334-222-0025
Email: dtp@alaweb.com
http://www.davistractor.com